brake mechanism

英 [breɪk ˈmekənɪzəm] 美 [breɪk ˈmekənɪzəm]

网络  制动机构

计算机



双语例句

  1. This type of drum brake has an application mechanism which is simpler, more reliable and insensitive to temperature.
    这种类型的鼓式制动器已申请机制,这是更简单,更可靠和敏感的温度。
  2. Cretan brake thus provides us a new plant material to study the mechanism of As-accumulation.
    这一发现为研究揭示砷在植物中的超富集机理提供了一种新的材料。
  3. A comprehensive study on brake judder, including phenomena, mechanism, influence factors, research methods and control measures was done in this paper.
    对制动抖动现象、机理、影响因素、研究方法以及控制措施进行较全面的研究。
  4. Application of emergency brake to the main hoisting mechanism of ladle crane
    紧急制动器在铸造起重机主起升机构上的应用
  5. Insert bracket over parking brake mechanism.
    将托架插到驻车制动机构上方。
  6. Analysis of the brake distance in the condition of ladle crane's hoisting mechanism failure
    铸造起重机升降故障状态制动行程分析
  7. Drum brakes have more parts than disc brakes and harder to service, but they are less expensive to manufacture, and they easily incorporate an emergency brake mechanism.
    鼓式制动比盘式制动的零件多,维护也更困难,但鼓式制动造价便宜,且易于与紧急制动机构配合。
  8. The requirement to a brake of the lifting mechanism of a ladle crane is safety, reliability, without excessive shock.
    对铸造起重机起升机构制动器的要求是安全可靠和不产生过大的冲击。
  9. Brake mechanism turns to be effective when the particular incident occurs that the stock incentive is unsuitable or unable for continuation and so to reduce the possible risks and potential losses to the maximum extent.
    制动机制在股权激励计划不宜或无法继续推行的特定情形出现时生效,以最大限度的降低可能出现的风险及损失。
  10. Two typical brake drums were used to investigate the failure mechanism of the low-alloy iron brake drum of automobiles. The composition and metallographic analysis and hardness testing were carried out.
    文章通对2种典型失效形式的低合金铸铁汽车制动鼓进行成分分析、金相检查及硬度测试,寻找失效机理形式。
  11. The Development of Test Machine for Drum Brake's Automotive Adjusting Mechanism
    鼓式制动器自动调隙机构试验台的研制汽车万向节高低温实验机
  12. Simulation system for brake mechanism image teaching
    制动机原理动画教学仿真系统
  13. Composition, properties, and application of J-671 adhesive for automobile brake were introduced. Its cure mechanism was investigated.
    介绍了J-671汽车刹车片胶粘剂的组成、性能、应用,并对该胶粘剂的固化机理进行了研究。
  14. Hand brake and rear wheel bounding fatigue test rig for car has been developed in order to test and evaluate endurance performance of hand brake, pull cable and flexible hose of pull cable of brake actuating mechanism of car.
    为检测和评价轿车手制动和制动机构拉索及拉索导管的耐久性能,研制了轿车手制动及后轮跳动疲劳试验台。
  15. The theory basis for electro-hydraulic brake to be used extensively in hoisting mechanism has been given and the available measures have been researched.
    为电动液压推杆制动器在起升机构上的运用找到了理论根据,并提出了加速电动液压推杆动作的可行性措施。
  16. Automatic brake adjuster in bus is a wonderful mechanism in order to complete function of auto-adjust.
    汽车刹车间隙自动调整臂为达到自动调整的功能,一般设计的都是很巧妙的的机构。
  17. In this paper we've studied the braking smoothness of self-energizing disc brake which has been widely used in the tractors. Meanwhile, the mechanism of braking process, especially the elastic impact between shoulder of brake disc and shoulder of brake housing have also been researched into.
    本文研究了在拖拉机上广泛应用的自动增力式盘式制动器的制动平顺性,对制动过程的机理,尤其对压盘凸肩和壳体凸台间的弹性碰撞进行了研究。
  18. At last the flow chart about how to calculate the opening time and the identifying method about the precision of the brake drag mechanism are given.
    给出了解算阻力机构展开时间的流程图和阻力机构展开时间数据表精度验证方法。
  19. To reduce the items of parts and components and lower the manufacturing cost, an independent suspension/ in-wheel motor module is proposed for a 4WD electric vehicle. The module consists of an in-wheel motor, a speed sensor, a disc brake and a double-wishbone suspension mechanism.
    四轮驱动电动汽车采用由轮毂电机、转速传感器、制动盘和双横臂悬架机构组成的结构相同的独立悬架-电动轮模块,可大幅度减少零部件种类,降低制造成本。
  20. Based on the manual adjusting lever of brake clearance, the finite element optimization model of control components of adjusting mechanism is created.
    在制动器制动间隙手动调整臂的基础上,应用有限元优化设计技术,建立了调整机构控制零件的有限元优化设计模型。
  21. The relationship between safe driving and technical condition of automobiles is analyzed in terms of steering system, brake system, wheel, walking mechanism, light signals and the key points for preventing accidents are presented.
    本文主要从转向装置、制动装置、车轮、行路机构、灯光信号等方面分析了安全行驶与汽车技术状况的关系,指出了事故预防的要点。
  22. Based on the brake mechanism, the work posture and wear performance of the electromagnet are analyzed, and the unsymmetrical electromagnetic force is proposed to realize the even wear of the ( electromagnet) surface and decrease the revolving tendency.
    为了实现电磁体摩擦表面均匀磨损和减小旋转趋势,基于制动器制动机理,分析了电磁体制动时的工作姿态及其表面磨损的情况,提出了非轴对称的电磁吸力要求。
  23. Application of speed regulation with eddy current brake to the luffing mechanism of portal crane
    涡流制动器调速在门座起重机变幅机构上的应用
  24. The selection of brake for lifting mechanism of a ladle crane
    铸造起重机起升机构制动器的选用
  25. This paper introduces the testing method of braking time and relative parameters of exigent brake and working brake of casting crane main hoist mechanism. Based on the analysis to test results, the safe braking conditions of exigent brake are discussed.
    阐述了铸造起重机主起升机构紧急制动器和工作制动器制动时间及相关参数的试验方法,且通过对试验结果分析探讨了紧急制动器安全制动应具备的条件。
  26. Then trajectory-recognized method which is based on the theory of the minimum velocity and its built-up time is analyzed and the workout process of the opening time table of the brake drag mechanism is described later.
    分析了基于弹道速度最小值及其出现时间的弹道辨识方法,建立阻力机构展开时间表的编制过程;
  27. At present, dynamic analysis of tower crane most focus on the start and brake process of lifting mechanism; the calculation method in design specifications and theoretical lifting load coefficient in all states are also aim at lifting process.
    目前,国内外对塔式起重机的动态分析多集中于起升机构的起动与制动过程的动态研究,各国设计规范中的计算方法与理论中的有关动载系数亦是针对起升过程而言。
  28. The main work includes the following several parts: touch the pump body, make way for agencies, balance weight protection, brake mechanism. Firstly, the overall program design of energy-saving pumping unit change direction by ratchet.
    本课题的研究主要工作包括以下几个部分:首先,棘轮换向节能式抽油机的总体方案设计。
  29. This pumping unit is made up of supporting frame, ratchet reversing gearbox, touch the pump body, make way for agencies, balance weight protection, brake mechanism.
    该抽油机的主要组成结构包括机架,棘轮换向减速箱,碰泵机构,让位机构,平衡重保护装置,刹车机构。
  30. Brake controller is an extremely important component of brake system in locomotive. It is a operation mechanism for the train driver directly control the train running and braking.
    制动控制器是机车制动系统的重要部件,它是列车司机对列车实行制动控制的直接操作机构。